Revcon Forums
https://policeinterceptor.com/revconforums/

Walking Beam bushings
https://policeinterceptor.com/revconforums/viewtopic.php?f=13&t=50
Page 1 of 1

Author:  reneg [ Wed Oct 22, 2014 7:04 pm ]
Post subject:  Walking Beam bushings

I am in dire need of center beam bushings for my 87 Prince as the waddling down the road is getting to me.I have removed drivers beam and pressed out one end bushing and the center beam bushing to be able to match up replacements.Unfortunately no shop around her can come up with a replacement for the center bushing.Any help with part #s would be muchly appreciated.

Rene

Author:  Daveinet [ Thu Oct 23, 2014 1:03 pm ]
Post subject:  Re: Walking Beam bushings

IF you can find a bushing where the center hole is correct, and the outer rubber is larger, you could put it on a lathe and sand it down to size.

But a better option may be to do a Google search on "custom urethane suspension bushings". There should be plenty of information to solve you problem. You may have to save your old sleeves, but you should be able to get them custom made for what ever you need. Some guys will make them themselves, but I would think you would be better off to have them made, so they are not under sized.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/