Revcon Forums

The worldwide owner-to-owner support system for the Revcon Motorcoach
It is currently Thu Jul 09, 2020 7:10 am

All times are UTC




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Sun Jun 29, 2014 1:56 am 
Offline

Joined: Fri Jun 27, 2014 7:56 am
Posts: 14
Location: Birdsboro PA
on my 81 revcon, the front parking light lenses are very faded and one has been cracked for the past 15 yrs at least.
also the rear reflectors on the back corners are faded badly.

question is are the front parking lights unobtanium? ($$$)

i'm all for mods, anyone know of some lenses that can be made to fit into place without huge anounts of bodywork?
throwing this out there in case i'm not the first to have faded front lenses.

scott

_________________
Scott
1981 Revcon 33'


Top
 Profile  
 
PostPosted: Sun Jun 29, 2014 6:18 pm 
Offline

Joined: Fri Sep 13, 2013 3:37 pm
Posts: 126
I have a '89 coach, and my front parking lights are actually a 2-fer. There's an outer orange shield that's custom made, and a inner light assembly that's like one off a construction truck with it's own colored lens & all. Dave would probably know parts availability or interchange for that year coach.....

_________________
System Manager and your tourguide for the day. 1989 Revcon 31' MB #2752. Coach renovated between 2006-2009. 454 with .030 overbore, Doug Thorley headers, Federal Model 58 Traffic Blaster, Voyager backing camera system, more mods shortly forthcoming.


Top
 Profile  
 
PostPosted: Mon Jun 30, 2014 2:43 am 
Offline
User avatar

Joined: Sat Sep 14, 2013 12:36 am
Posts: 118
Location: IL
I've looked at those plastic lenses and have not been able to find a viable replacement. The center lens is a common part, but the orange plastic around the lens is some weird custom thing. I work for a company that makes machines to assemble plastic. Since we are big in the automotive industry, i see head and tail light assemblies on a regular basis. I have yet to see anything that could be reasonably made to work. Mine are not broke, but are very faded. The rears have several solutions, but the front, so far it seems we are stuck.

_________________
Dave

The Flying Fortress
'83 Revcon Prince 31' FWD
502 w/Howell/GM 16197427 ECM/Edelbrock MPFI,Thorley's & Magnaflows,
4L85E 4 speed, KoniFSD,
Yes it is SOLD

FMCA F298817


Top
 Profile  
 
PostPosted: Mon Jun 30, 2014 2:50 am 
Offline

Joined: Fri Jun 27, 2014 7:56 am
Posts: 14
Location: Birdsboro PA
thanks!
i will share pics when i take some, i am hoping to bring it up to my place real soon and clean up the best i can.
i thought there was some sort of stock truck light inside that custom casting.

_________________
Scott
1981 Revcon 33'


Top
 Profile  
 
PostPosted: Wed Jul 02, 2014 4:25 am 
Offline

Joined: Fri Sep 13, 2013 3:37 pm
Posts: 126
Dave, just thinking outside the box here. Is the amber lens something that could be AutoCAD'ed and sent out for a small quantity production? With Marty getting long in the tooth there may be more then a few custom parts like this that need to be outsourced and sold.

I'm not sure who ended up with the intellectual property rights after the final bankruptcy, but it may be worth our while to find out.

_________________
System Manager and your tourguide for the day. 1989 Revcon 31' MB #2752. Coach renovated between 2006-2009. 454 with .030 overbore, Doug Thorley headers, Federal Model 58 Traffic Blaster, Voyager backing camera system, more mods shortly forthcoming.


Top
 Profile  
 
PostPosted: Mon Jul 14, 2014 5:34 pm 
Offline
User avatar

Joined: Sat Sep 14, 2013 12:36 am
Posts: 118
Location: IL
Anyone for 3D printing? One could probably have the lenses 3D printed at a fairly reasonable cost. I would not worry about the intellectual property, even if it really belonged to someone. The design would never be used again anyway, as it is not in style with any modern vehicle. The demand is not high enough for replacements, that it would be to anyone's value to manufacture them for a profit. The approach I would take is to only measure the outside dimensions of the mounting surfaces, and then design my own lenses. Have it done in semi-clear, with the intent on using a LED panel behind the lenses. No one really wants to use incandescent bulbs anymore anyway. Find an existing LED turn signal light that can be gutted and used, and then design the lenses around the LED guts.

_________________
Dave

The Flying Fortress
'83 Revcon Prince 31' FWD
502 w/Howell/GM 16197427 ECM/Edelbrock MPFI,Thorley's & Magnaflows,
4L85E 4 speed, KoniFSD,
Yes it is SOLD

FMCA F298817


Top
 Profile  
 
PostPosted: Thu Jul 17, 2014 1:17 pm 
Offline

Joined: Tue Sep 24, 2013 12:13 pm
Posts: 23
Regarding those amber / orange lenses: I pulled mine off last year to look them over (mercifully not cracked). I found the inside of the lens to be shiny and bright just like you would expect. The outside was very dull and almost opaque. A little elbow grease and some polishing compound brought back some of the shine, but I suspect using one of the headlight restoration kits that have popped up all over would probably make them shine like new.

They look to be ordinary plexiglass, simply heat formed over a plug and then trimmed around the perimeter, so replication shouldn't be too tough. I'm not sure I have the energy to make replacements but I'll be somebody out there does.

_________________
Jerry

Wally World Express 2.0
1989 Revcon Slant Nose 34 (#2750)
GM High Torque 502 w/ Weiand Supercharger


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group