Revcon Forums

The worldwide owner-to-owner support system for the Revcon Motorcoach
It is currently Sat Oct 16, 2021 12:17 am

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Interior Rework
PostPosted: Fri Jun 23, 2017 3:23 am 
User avatar

Joined: Sat Feb 13, 2016 6:16 am
Posts: 21
Location: Charlotte, NC
Questions concerning the Cocktail table and overhead cabinets.

The 70s yellow/brown shag carpet is dirty, screams 1970s & needs replacing. It was installed in a continuous run from the floor up the wall behind the cocktail table. I am unable to ascertain why, after removing all visible screws/attaching hardware, the table is still anchored very securely to the wall.

Has anyone removed this table to complete an interior redo?

My interior wall covering (1/8" paneling) has cracks on both sides of the coach which makes me want to replace it which will require removing the overhead cabinets. They are screwed to the ceiling at the front, but with all the screws removed, they are still securely attached to the coach.

I thought I had a knack for tearing stuff up, but I am at a loss as to what I need to do next.

Anybody have any input or suggestions?

Mfg Date 0679
30' Revcon Mid-coach bath/Double Bed LR
VIN RFS279000143 Ser # 9310
454 Quadrajet Dexter Rear Axles Stock Drivetrain
16.5 950x16 x 6
Soon to be 225-75R16 on GMC 8 Lug Wheels

 Post subject: Re: Interior Rework
PostPosted: Fri Jun 23, 2017 1:38 pm 
User avatar

Joined: Sat Sep 14, 2013 12:36 am
Posts: 137
Location: IL
Your table is different than mine, as you have a storage compartment under your chairs. However you may be interested to know that when I removed my table, there were no less than 27 screws that held it to the floor and wall. I suspect you have probably missed a few.

I'm surprised your interior walls are paneling. Is this wood paneling? Revcon interiors normally are a plastic coating over an aluminum skin. The older ones, the plastic coating was porous and tended to absorb dirt. The later ones used a better plastic, and were mush easier to keep clean. Was your paneling added by a previous owner?


The Flying Fortress
'83 Revcon Prince 31' FWD
502 w/Howell/GM 16197427 ECM/Edelbrock MPFI,Thorley's & Magnaflows,
4L85E 4 speed, KoniFSD,
Yes it is SOLD

FMCA F298817

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group