Revcon Forums
https://policeinterceptor.com/revconforums/

Axle Boot
https://policeinterceptor.com/revconforums/viewtopic.php?f=14&t=194
Page 1 of 1

Author:  tttphd [ Fri Jan 08, 2021 4:30 pm ]
Post subject:  Axle Boot

Made a mistake by placing this under Flatnose. Will try here.

I need new axle boots for my 1984 Revcon King. My search yielded a BT-136,
a NAPA 686-1064 and a Moot cv-2456. I could not locate the BT-136 but I did find the other two. Will these work? I can use any help!!

Tom

Author:  Daveinet [ Tue Jan 12, 2021 6:04 am ]
Post subject:  Re: Axle Boot

I have no idea if these would work of not, but at least worth looking into:
https://www.stretchcvboot.com/cv-boots/
The way these stretch over the C-V, I'd have to think they would fit just about anything. Otherwise Rockford CV has a listing of sizes. Since I sold my coach, I can't measure to see if any these are close:
http://www.rockfordcv.com/pdfstore/Boot_Assemblies.PDF
The BT 136 is a number stamped on my boot. It was rebuilt by Rockford CV, however when they look up that boot number, it is way smaller than the CVs on our coaches, so I don't know why mine has that number molded into the rubber.
The CVs were made by Con-Vel and were an agricultural product. Con-Vel appears to still be around.
http://con-vel.com/ConvelBrochure%20(1).pdf

Author:  tttphd [ Wed Jan 13, 2021 5:59 pm ]
Post subject:  Re: Axle Boot

This is an update on my search for axle boots. I called Rockford Constant Velocity to discuss an alternative. Fortunatly, the individual with whom I spoke remembered my previous call and informed me that he had done additional research and found the
BT-136 boot. The problem was due to his not having entered the dash between the BT and the 136 into his computer. So, the BT-136 from Rockford CV Is available and my cost was $46 each plus shipping. Just remember to include the dash!

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/